M.C. Miller RE-5C Electrode
When working with softer soil conditions, the M.C. Miller RE-5C is recommended. The pointed tip of the cell allows the reference electrode to be placed into the soil, offering maximum surface contact. The main body is built out of a Lexan tube with a side viewing window to check on the reference cell’s condition. Inside the tube, the reference cell comes with a high purity copper core rod and some initial copper/copper sulfate crystals for initial use.
• Lexan tube body with viewing window
• High purity copper core rod
• Pointed ceramic plug front end
• Back end comes with a 1/4 inch threaded end
• 6.0” length, 1.375” diameter
• High purity copper core rod
• Pointed ceramic plug front end
• Back end comes with a 1/4 inch threaded end
• 6.0” length, 1.375” diameter
The M.C. Miller RE-5C portable reference electrode is used to measure pipe to soil potential reading at the grounds surface. The pointed ceramic plug is to be pushed into the soil where the potential readings are to be made. Once the cell is placed in the ground, connected to a true RMS multi-meter through the negative terminal, the positive connection can be touched to the structure to give the potential reading.
When ordering a RE-5C portable reference electrode, please make sure to indicate the quantity of cell’s you may require. Corrpro offers replacement copper/copper sulfate crystals for servicing the reference electrode, as well as copper sulfate anti-freeze solution for winter performance of the reference cell. The reference cell does not come with a lead to connect to a true RMS multi-meter. Corrpro offers a selection of lead assemblies for the reference cell.
Corrpro Technical Support
800.826.7891
Corrpro U.S. Materials
11616 W 59th Street
Sand Springs, OK 74063
Ph: 1.866.CORRPRO
Fax: 713.460.6060
Email: CorrproSales@aegion.com
Corrpro Canada Materials & Corrpower Manufacturing
10848 – 214 Street N.W.
Edmonton, Alberta T5S 2A7
Phone: 780.447.4565
cpcamaterials@aegion.com
